These covers are required for cabinets installed outdoors. They have a slightly inclined profile to facilitate the runoff of water or liquids. Made from EN 1.4307 stainless steel.
AISI304L (EN 1.4301)
Double-bit insert + low-voltage key
IP66 - IP69K (IP65 rating for double door)
Sendzimir galvanized, always included
Extra-large enclosures
This enclosure, made from Type 304L EN 1.4307 stainless steel with a Scotch Brite satin finish, offers greater height, width and depth (400 mm) than the enclosures in the QL/QV family. The single-body structure features contoured edges and a reversible solid door. The stainless steel locks with a double-bit insert and the Type 316L stainless steel internal hinges, which open 120°, guarantee security and functionality. A cable gland plate with sealing gasket is provided for models with H. 1200mm – H. 1600mm. Featuring an IP66 protection rating (single door) or IP65 rating (double door), the four wall mountings complete the enclosure, offering a solid base for any installation. The depth of the internal plate, fastened with M8 bolts, can be adjusted in certain models for a wider range of applications.
These covers are required for cabinets installed outdoors. They have a slightly inclined profile to facilitate the runoff of water or liquids. Made from EN 1.4307 stainless steel.
These fastenings are attached onto the back of boxes in special standard threaded inserts. They make installation easier on the wall or directly on the machine’s frame.
Different locks are available for all types of enclosures, all of which are perfectly interchangeable with the ones provided.
These springs are required for a gull-wing opening. They are equipped with an end-travel damping device for a balanced open position.
These products are used to secure the end of an electrical cable at the entry point of a panel or enclosure, ensuring an excellent seal against dust and liquids and protecting the cable from strain or vibrations.
Available in various sizes (A3 – A4 – custom) and materials (ABS – hot-dip galvanized metal – stainless steel)
These units can operate in either intake or extraction mode. ABS plastic body (RAL7035). They are also available in a version with a stainless steel cover. IP54 protection rating.
These filters capture dust particles down to 10 microns. ABS plastic body (RAL7035). They are also available in a version with a stainless steel cover. IP54 protection rating.
These covers are for installation on grilles to guarantee greater protection against direct jets of water. Made from Type 304 stainless steel. IP55 protection rating.