This kit is required to control the opening of any secondary doors to the main door.
AISI304L (EN 1.4301)
1,5mm - 2,0mm
Bolted, Removable
IP65
Foamed polyurethane
Bolted, Removable
The MX modular cabinet is made from EN 1.4307 stainless steel (Type 304L), formed of a strong profiled internal frame, 1.5 mm thick rear and side panels and a 2.0 mm door.
The door features (3+3) shatterproof laminated glass to help prevent dangerous glass shards if it breaks. The inside of the door features a pre-drilled reinforced frame so you can install cable ducts or instruments.
The rear part can have a bolted solid panel or a second set of hinged doors; the side panels and the top panel are removable.
This cabinet features a front lever handle with a four-point locking mechanism, internal hinges made from Type 316L stainless steel so it opens 120° as well as an IP66 protection rating, ensuring it complies with standards CEI EN 60204-1 and CEI EN 60529.
The two doors ensure compliance with protection certifications by closing over one another with no need for a central mullion, therefore allowing completely unobstructed front access.
You can customize this cabinet with accessories such as cable gland plates (in different versions) and hot-dip galvanized internal plates.
| Code | Width | Height | Depth | Internal plate | Sides | Plinth H. 100 | Plinth H. 200 | Drawings |
|---|---|---|---|---|---|---|---|---|
| MXV1285 | 1209 | 1827 | 518 | PA1117 | MX85 | ZX12105 | ZX12205 | — |
| MXV1286 | 1209 | 1827 | 618 | PA1117 | MX86 | ZX12106 | ZX12206 | — |
| MXV1288 | 1209 | 1827 | 818 | PA1117 | MX88 | ZX12108 | ZX12208 | — |
| MXV1685 | 1614 | 1827 | 518 | PA1517 | MX85 | ZX16105 | ZX16205 | — |
| MXV1686 | 1614 | 1827 | 618 | PA1517 | MX86 | ZX16106 | ZX16206 | — |
| MXV1688 | 1614 | 1827 | 818 | PA1517 | MX88 | ZX16108 | ZX16208 | — |
| MXV1205 | 1209 | 2027 | 518 | PA1119 | MX05 | ZX12105 | ZX12205 | — |
| MXV1206 | 1209 | 2027 | 618 | PA1119 | MX06 | ZX12106 | ZX12206 | — |
| MXV1208 | 1209 | 2027 | 818 | PA1119 | MX08 | ZX12108 | ZX12208 | — |
| MXV1605 | 1614 | 2027 | 518 | PA1519 | MX05 | ZX16105 | ZX16205 | — |
| MXV1606 | 1614 | 2027 | 618 | PA1519 | MX06 | ZX16106 | ZX16206 | — |
| MXV1608 | 1614 | 2027 | 818 | PA1519 | MX08 | ZX16108 | ZX16208 | — |
This kit is required to control the opening of any secondary doors to the main door.
These panels should be attached to the outside of the module or to a multi-module system, fastening them to the frame from the outside with 8 stainless steel screws.
Available for all cabinet depths, these cross members come complete with screws.
Made from EN 1.4301 stainless steel (Type 304L), this inner door can be hinged on either the right or left. It can support a maximum load of 30kg. IP20 protection rating (IP54 upon request).
This panel made from 2.5 mm thick EN 10142 hot-dip galvanized sheet metal should be inserted between two modules to create a separation. Available in two versions: IP20 or IP65.
This system helps save up to 30% of space inside a cabinet. The use of an internal plate helps switch from traditional wiring to the SRS system.
Air-conditioning system suitable for installation on the door or side.
These units can operate in either intake or extraction mode. ABS plastic body (RAL7035). They are also available in a version with a stainless steel cover. IP54 protection rating.
These filters capture dust particles down to 10 microns. ABS plastic body (RAL7035). They are also available in a version with a stainless steel cover. IP54 protection rating.
This unit can be used as a simple filter or to increase airflow. When used without filters, it becomes an effective natural ventilation system, guaranteeing protection against water.
Available with an ON/OFF switch or PIR motion sensor. Comes with screws for easy installation inside an electrical panel.
These covers are for installation on grilles to guarantee greater protection against direct jets of water. Made from Type 304 stainless steel. IP55 protection rating.