This kit is required to control the opening of any secondary doors to the main door.
AISI304L (EN 1.4301)
1,5mm - 2,0mm
Non-removable, Single-body shell
IP65
Foamed polyurethane
Non-removable, Single-body shell
The CX cabinet is made from EN 1.4307 stainless steel (Type 304L), formed of a single-sheet shell while a series of multiple bends means it is suitably heavy-duty. The rear panel and top are not removable. The side panels are 1.5 mm thick while the door is 2.0 mm thick, both of which are removable.
The door can be completely solid, with the option of adding partial windows. The double-bit lock with 4-point closing mechanism, along with the expanded polyurethane gasket, guarantees a high level of safety and protection against dust and ingress. The IP66 protection rating, the Type 316L stainless steel hinges and the possibility of opening 120° comply with the CEI EN 60204-1 standard.
The two doors ensure compliance with protection certifications by closing over one another with no need for a central mullion, therefore allowing completely unobstructed front access.
You can customize this cabinet with accessories such as cable gland plates (in different versions) and hot-dip galvanized internal plates.
| Code | Width | Height | Depth | Internal plate | Sides | Plinth H. 100 | Plinth H. 200 | Drawings |
|---|---|---|---|---|---|---|---|---|
| CX1284A | 1211 | 1800 | 400 | PA1117 | CX84A | ZX12104 | ZX12204 | — |
| CX1285A | 1211 | 1800 | 500 | PA1117 | CX85A | ZX12105 | ZX12205 | — |
| CX1286A | 1211 | 1800 | 600 | PA1117 | CX86A | ZX12106 | ZX12206 | — |
| CX1204A | 1211 | 2000 | 400 | PA1119 | CX04A | ZX12104 | ZX12204 | — |
| CX1205A | 1211 | 2000 | 500 | PA1119 | CX05A | ZX12105 | ZX12205 | — |
| CX1206A | 1211 | 2000 | 600 | PA1119 | CX06A | ZX12106 | ZX12206 | — |
This kit is required to control the opening of any secondary doors to the main door.
Made from EN10142 hot-dip galvanized sheet metal, these plates come in an assembly kit adjustable across the entire depth of the cabinet, forming a sturdy mounting platform.
These panels should be attached to the outside of the module or to a multi-module system, fastening them to the frame from the outside with 8 stainless steel screws.
Available for all cabinet depths, these cross members come complete with screws.
Made from EN 1.4301 stainless steel (Type 304L), this inner door can be hinged on either the right or left. It can support a maximum load of 30kg. IP20 protection rating (IP54 upon request).
This panel made from 2.5 mm thick EN 10142 hot-dip galvanized sheet metal should be inserted between two modules to create a separation. Available in two versions: IP20 or IP65.
Air-conditioning system suitable for installation on the door or side.
These units can operate in either intake or extraction mode. ABS plastic body (RAL7035). They are also available in a version with a stainless steel cover. IP54 protection rating.
These filters capture dust particles down to 10 microns. ABS plastic body (RAL7035). They are also available in a version with a stainless steel cover. IP54 protection rating.
These covers are for installation on grilles to guarantee greater protection against direct jets of water. Made from Type 304 stainless steel. IP55 protection rating.
This unit can be used as a simple filter or to increase airflow. When used without filters, it becomes an effective natural ventilation system, guaranteeing protection against water.
Available with an ON/OFF switch or PIR motion sensor. Comes with screws for easy installation inside an electrical panel.